Our export team supports buyers in these languages:
Deutsch 
Español 
Français 
Português 
Italiano 
Русский 
العربية 
Türkçe Explore our core AC/DC switching power supply inventory available with factory-direct customization, rapid logistics to Yangon ports, and heavy-duty transient protection.
In developing Yangon's industrial and commercial infrastructure—spanning key production hubs like the Hlaing Tharyar Industrial Zone, Mingaladon Industrial Park, Shwe Pyi Thar, and the Thilawa Special Economic Zone (SEZ)—power reliability remains the defining constraint on capital equipment longevity. Industrial plants across Greater Yangon regularly operate under the jurisdiction of the Yangon Electricity Supply Corporation (YESC), facing frequent rotational load shedding, voltage sags dropping below 170VAC, and severe line surges during grid restoration or emergency backup diesel generator (genset) synchronization.
When procurement managers import generic commercial power supplies designed exclusively for steady-state 220V/230V utilities, premature failure rates escalate dramatically. Field data from Myanmar industrial plants indicate that more than 68% of switching power supply breakdowns stem from two compounding causes: input overvoltage transients generated during manual genset cutovers, and thermal runaways exacerbated by high relative humidity (often exceeding 85% to 92% throughout the monsoon months from May to October) paired with ambient temperatures hovering between 36°C and 42°C inside unconditioned steel-structure factories.
Automatic Transfer Switches (ATS) installed in manufacturing plants frequently introduce high inductive back-EMF and severe waveform distortions (Total Harmonic Distortion > 15%). Standard flyback SMPS topologies with narrow input stages (e.g., 200–240VAC) fail due to primary MOSFET avalanche breakdown. Zhejiang Harlon Electronic Co., Ltd. addresses this by implementing an extended universal AC input range (85VAC to 264VAC / 120VDC to 370VDC), high-energy varistors (MOV), and reinforced secondary isolation capable of absorbing 300VAC sustained surges for up to 5 seconds without tripping or degradation.
Furthermore, tropical moisture combined with airborne particulate matter—common in timber processing, flour mills, garment sewing floors, and plastics manufacturing in Yangon—generates conductive dendrite growth across close-spaced PCB traces. Harlon's OEM/ODM engineering protocol implements automated double-sided conformal coating across all internal printed circuit boards. This protective polymer barrier seals high-voltage switching nodes against galvanic corrosion, conductive dust bridging, and fungal infestation, fulfilling Class B environmental resilience standards under IEC 60068 environmental testing protocols.
From industrial sewing machinery lines to decentralized telecommunications and highway LED advertising, our power supply architectures are tailor-built for high uptime in harsh tropical environments.
Over 500 apparel and footwear operations in Hlaing Tharyar and Shwe Pyi Thar rely on stable 24V DC bus architectures to drive automated pattern cutters, multi-head embroidery machines, servo motors, and sensor arrays without stutter during line fluctuations.
Cell towers and remote base transceiver stations (BTS) throughout the Yangon-Mandalay corridor operate on 48V DC power supplies linked with backup battery arrays, demanding ultra-low ripple voltage (<100mVp-p) and continuous 24/7/365 active power factor correction (PFC).
High-lumen digital billboards in Bahan, Dagon, and Downtown Yangon face extreme solar heating followed by sudden torrential rain. Our IP67 waterproof drivers and enclosed 5V/12V SMPS deliver high current (up to 125A) with built-in thermal foldback protection.
With widespread reliance on micro-grids in peri-urban Yangon, our bi-directional DC-DC converters and robust SMPS modules bridge the gap between volatile solar photovoltaic outputs, 48V energy storage systems (ESS), and backup generator inputs.
Critical security perimeters at warehouses, transit depots, and container yards require unified 12V/24V multi-channel central power units featuring individual PTC fuse reset circuits and anti-surge immunity to protect IP cameras from lightning strikes.
Industrial machinery builders and electrical panel integrators in Thilawa SEZ require TS-35 rail-mounted MDR/EDR/NDR power supplies equipped with DC OK relay contacts, low idling loss (<0.75W), and compact footprints to fit space-constrained electrical enclosures.
Review engineering tolerances, safety protections, and design architectures optimized for the Myanmar electrical landscape.
| Series Category | Standard Wattage | Input Voltage Window | Efficiency | Cooling Topology | Target Local Application |
|---|---|---|---|---|---|
| S-Series Enclosed | 15W – 1500W | 85–132VAC / 176–264VAC (Selectable) | 82% – 89% | Convection / Internal Fan | General machinery, LED displays, automation panels |
| High-Power SE/SP | 350W – 3000W | 180–264VAC (With Active PFC) | 89% – 93% | Dual Thermostatic Ball-Bearing Fan | Laser cutting, electroplating, heavy telecom racks |
| DIN Rail (MDR/EDR/NDR) | 10W – 480W | 85–264VAC Universal Input | 85% – 92% | Natural Air Convection | Control switchboards, PLC cabinets, building automation |
| Waterproof LED Drivers | 30W – 600W | 90–305VAC Extended Range | 88% – 94% | Full Aluminum Silicone Gel Potting | Outdoor architectural facades, streetlights, billboards |
| Isolated DC-DC Series | 15W – 1000W | 9–18V / 18–36V / 36–72V DC | 84% – 91% | Chassis Mount Convection | Electric vehicles, solar batteries, off-grid telecom |
With an extensive manufacturing footprint in Wenzhou, Zhejiang, China, we operate as an audited source-level manufacturer delivering ISO 9001 certified consistency and customized OEM/ODM agility.
10+ fully automated production lines equipped with high-speed Yamaha SMT placement, automatic lead-free wave soldering, and automated gluing.
On-site assessment audited by SGS Group. Strict incoming IQC, SMT AOI optical testing, IPQC in-process auditing, and final functional quality gates.
Established in 2007 with nearly two decades of focus on switching power topologies. R&D team leader brings ~30 years of independent SMPS design expertise.
Every single unit undergoes rigorous 4-hour high-temperature full-load burn-in testing to screen infant mortality before export packaging.
Flexible terminal pinouts, custom voltage outputs (e.g., 13.8V, 28V, 54V), custom metal stamping, laser-etched buyer logos, and bespoke inner box packaging.
Experienced shipping documentation covering Form E, CO, and CI for clearance at Yangon Port (Asia World / MITT / Thilawa) or expedited air freight via RGN Airport.
Answers to technical specifications, import procedures, payment methods, and grid adaptation for factory engineers and wholesale distributors.
Our industrial switching power supplies are designed with an ultra-wide primary duty cycle and wide-range input stages (85VAC to 264VAC). When YESC utility voltages dip down to 160V–170V during peak daylight hours in Hlaing Tharyar, our primary controller automatically adjusts pulse width modulation (PWM) to maintain rock-solid regulated DC output without thermal tripping.
Yes. Generator changeovers frequently create high-voltage transient spikes exceeding 400V for several milliseconds. We integrate metal oxide varistors (MOVs) rated for high peak pulse currents alongside differential and common-mode input choke coils to suppress transient inductive kickback, ensuring internal MOSFETs and bridge rectifiers remain undamaged.
During March, April, and May, enclosed factory temperatures in Myanmar frequently surpass 40°C. For naturally cooled models (free-air convection like the S-120 and S-145), we advise engineers to apply a standard derating factor of 20% to 25% (operating at 75–80% max continuous load), or upgrade to our fan-cooled S-1200 or S-1500 series with ball-bearing thermostatic ventilation.
High ambient humidity (often above 90% RH) can lead to condensation and electrochemical migration on circuit boards. Upon customer request, all Harlon products shipped to Southeast Asian markets receive double-dip conformal coating (modified polyurethane or silicone) that seals solder fillets against moisture, salt spray, and atmospheric contaminants.
We support FOB Ningbo/Shanghai, CIF Yangon, CFR, and EXW terms. Sea freight from Ningbo or Shanghai port directly to Yangon Port (including Thilawa Terminal or Asia World Port) typically takes between 14 to 22 transit days. Urgent sample requests and small batch orders can be dispatched via air freight directly to Yangon International Airport (RGN) within 4 to 6 business days.
Our standard and industrial switching power supplies comply with CE (LVD EN 62368-1 safety directive), CE EMC (EN 55032 Class B emission standards), RoHS, and FCC Part 15 regulations. Full compliance certificates, test reports, and factory ISO 9001:2015 documentation are provided with shipment files to facilitate customs release.
Yes. In addition to standard 5V, 12V, 24V, 36V, and 48V configurations, our engineering laboratory accommodates non-standard OEM orders including 7.5V, 13.8V (battery float charge), 15V, 18V, 27.6V, 54V, and high-voltage rails up to 110V/220V DC. We also provide sample-based reverse engineering and connector harness tailoring.
To provide flexibility for international trade transactions, we accept Wire Transfer (T/T), Letter of Credit (L/C at sight), Western Union, and PayPal for sample prototyping orders. Currencies accepted include USD, EUR, CNY, and HKD, backed by complete commercial invoicing and packing lists.
Direct from our ISO 9001 certified manufacturing facility in Zhejiang to your factory floor in Yangon. Connect directly with our senior power supply engineers for tailored volume quotations, custom electrical specifications, and fast-track sample prototyping.